
Schwarzoxidation: was eine ein Mikron dicke Konversionsschicht leistet und nicht leistet
Black oxide is a conversion coating, not a barrier: 0.2 to 1.5 micrometres of magnetite, negligible effect on fits, and corrosion protection that lives or dies on the oil supplement. Hot versus mid versus room temperature, what to write on the drawing,…
Alex Yu
Hochauflösender 3D-Druck: was 25 Mikron nicht über Ihr Bauteil aussagt
Schichthöhe, Mindeststrukturgröße und Maßtoleranz sind drei voneinander unabhängige Grenzwerte. Die Berechnung anhand der veröffentlichten prozessspezifischen Werte, der Aufwand für die Endbearbeitung sowie der Prüfkörper, der dies belegt, bevor Sie das Bauteil freigeben.
Alex Yu
Niederdruck-Spritzgießen: der Kräfteetat, der über das Überleben Ihres Einsatzteils entscheidet
Low-pressure injection molding protects boards because hot-melt thermoplastics flow fast, not because the pressure number is small. The cavity-pressure arithmetic, the material mistake most guides repeat, and when to pot instead.
Alex Yu
Leiterplatten-Overmolding: Niederdruck-Kapselung, Materialien und Bauteilüberleben
PCB overmolding is a force budget, not a moulding job: low-pressure encapsulation vs high-pressure vs potting, component-force arithmetic, board fixturing, and the verification that actually matters.
Alex Yu
Kunststoff-Overmolding: Wie die Verbindung entsteht, gemessen wird und versagt
Plastic overmolding explained by the people who cut the steel: the four adhesion mechanisms, keyed geometry rules, material pairs that actually bond, and how to prove the bond before production.
Alex Yu