Posts by this author.

Factory or Trading Company? Verify Your Molding Supplier
Is your injection molding supplier a real factory or a trading company? Seven remote tests: license scope, surprise video tour, nameplates, Cpk records.
Alex Yu
PEEK Machining vs Injection Molding: The Crossover Math
PEEK machining vs injection molding with honest crossover math: tooling payback bands, where the mill still wins, and when the hybrid route pays.
Alex Yu
Regrind in Injection Molding: Safe Ratios and Limits
Regrind in injection molding by resin family: safe blend ceilings, what degrades first, hopper ratio control, and the PO clauses that matter.
Alex Yu
POM Shrinkage Rate: What 2% Hides When Tolerances Get Tight
POM shrinkage beyond the 2% shortcut: grade and direction values, the 24-hour measurement clock, the hot-mold paradox, and steel-safe mold corrections.
Alex Yu
Resin Drying in Injection Molding: Practical Guide
Resin drying in injection molding, grade by grade: moisture targets, drying times, dew points, hopper sizing, and how to prove it's dry. Free 24h DFM.
Alex Yu
Custom Nylon Injection Molding: A Molder’s Guide
Custom nylon injection molding explained by the molders who run it: PA6 vs PA66 vs PA12, glass fiber, drying, warpage, tolerances, and a free 24h DFM.
Alex Yu
Micro Injection Molding: Complete Guide
Learn how micro injection molding works: tolerances down to ±5 µm, DFM design rules, mold making, process parameters, materials, cost, and quality control.
Alex Yu
Custom Plastic Injection Molding Company: The 10-Point Buyer’s Checklist (2026)
Choosing a custom plastic injection molding company is one of the highest-leverage sourcing decisions you will make this year. The piece price is only the surface. What actually decides your program's cost, launch date, and part quality is everything the quote doesn't…
Alex Yu
How to Fix Cloudy, Mottled Marks Near the Gate in Injection Molding
How to Fix Cloudy, Mottled Marks Near the Gate in Injection Molding Cloudy, mottled marks appearing near the gate are among the most common and frustrating injection molding surface defects. They ruin part aesthetics, increase scrap rates, and often stall production while…
Alex Yu