Polyethylene (PE) Injection Molding: Process Guide & Parameters

Polyethyleen (PE)[^1] is one of the most widely used crystalline raw materials in the plastics industry. Understanding its unique processing characteristics—from moisture resistance to shrinkage behavior—is essential for manufacturing high-quality parts.

In this post, we break down the processing performance and key molding conditions for PE.

PE Processing Characteristics

To optimize your spuitgieten[^2] cycle, you must understand how Polyethylene behaves under heat and pressure.

• Moisture Resistance: PE has extremely low hygroscopicity (moisture absorption Opmerking: Because shrinkage directionality is obvious, parts are prone to deformation and warping. Uniform mold cooling is critical to minimize this.
• Kristalliniteit: PE has high crystallization ability. Mold temperature directly affects the crystallinity of the part. Higher mold temperatures lead to slower cooling, higher crystallinity, and increased strength.
• Thermal Properties: Although PE has a low melting point, it has a high specific heat capacity. Therefore, the plasticizing unit requires high heating power to maintain efficiency.
• Oxidation Sensitivity: While PE has good thermal stability (no decomposition below 300°C), the melt oxidizes easily. Avoid prolonged contact between the melt and oxygen to prevent quality degradation.
• Ejection: PE parts are soft and easy to eject. Parts with shallow undercuts can often be forced off the mold (forced ejection).

Key Molding Parameters

Setting the correct machine parameters is vital. Below is a breakdown of the optimal conditions for LDPE and HDPE.

Temperatuurregeling

The barrel temperature depends on the density of the PE and the Melt Flow Rate (MFR). Since PE is crystalline, the barrel temperature should be at least 10°C above its melting point.

Pressure & Cooling

• Injectiedruk[^3]: Because PE flows so well, you should aim for the lowest effective pressure.
  • General Range: 50 – 100 MPa.
  • Simple/Thick Parts: Use lower pressure.
  • Thin-Walled/Complex Parts: Use higher pressure to ensure filling.
• Afkoeltijd: PE cools slowly and must be cooled sufficiently. Ensure your mold has an efficient cooling system to reduce cycle times.

3. Gate Design and Troubleshooting

The design of the feed system (gate) plays a crucial role in the final quality of the PE part.

• Gate Selection: If using a direct sprue gate, be aware that it can increase residual stress and cause uneven flow orientation, leading to significant warping. Carefully select gate dimensions to balance flow.
• Viscosity Behavior: PE melt viscosity is not strongly affected by shear rate changes (non-Newtonian behavior is less pronounced than other plastics). Temperature fluctuations in the flow state have minimal impact on the molding process, making PE a stable material to work with.

Summary Table: Quick Reference

By controlling the mold temperature and ensuring uniform cooling, you can leverage Polyethylene's excellent flow and toughness to produce durable, high-quality components.

Over de auteur

Alex Yu

Ideal Pro Manufacturing

Alex is medeoprichter van Ideal Pro, maar wanneer hij niet toezicht houdt op belangrijke projecten of leiding geeft aan het technische team, is hij waarschijnlijk bezig met een lange fietstocht, op zoek naar de beste koffie van de stad, of bezig met het plannen van zijn volgende reisavontuur. Met meer dan 20 jaar ervaring op het gebied van internationale handel en projectmanagement heeft hij het allemaal al meegemaakt: strakke deadlines, lastige technische vraagstukken en alles daartussenin. Hij is ervan overtuigd dat uitstekend werk voortkomt uit een uitgeruste geest en een goede kop koffie, en hij brengt diezelfde nieuwsgierigheid en oog voor detail mee in elk project dat hij aanneemt. Als hij niet op kantoor is, bevindt hij zich meestal ergens in de buitenlucht, waar hij nieuwe plekken verkent en verhalen verzamelt om te delen.