If you’re involved in injection molding—whether as a designer, manufacturer, or hobbyist—understanding three critical plastic properties is non-negotiable: shrinkage, flowability, and crystallinity. These properties directly impact part quality, mold design, and production efficiency.

In this guide, we break down each concept in plain language, plus actionable strategies to optimize your molding process. Let’s dive in!

Plastic Shrinkage: What It Is & How to Control It

Plastic shrinkage refers to the volume reduction of thermoplastic materials as they cool from molten to solid state during injection molding. Uncontrolled shrinkage causes warping, dimensional inaccuracies, and part defects—so mastering its triggers is key to successful molding.

Key Factors Affecting Plastic Shrinkage in Injection Molding

1.1 Plastic Material Type

Thermoplastics have higher shrinkage rates than thermosets due to crystallization, internal stress, and molecular orientation during cooling. For example:

• Crystalline plastics (e.g., PE, PP, PA) shrink more than amorphous plastics (e.g., PMMA, PC)

• Post-molding shrinkage (after annealing or moisture conditioning) is also more significant in thermoplastics

1.2 Part Design & Geometry

• Épaisseur de la paroi: Thicker parts cool slower, forming a denser inner layer that shrinks more. Aim for uniform wall thickness to avoid uneven shrinkage.

• Inserts: The number, layout, and material of inserts alter flow direction and shrinkage resistance. Metal inserts reduce local shrinkage but may cause stress concentrations.

1.3 Gate Design (Type, Size, Location)

Gates control how molten plastic fills the mold—directly impacting shrinkage:

• Large, direct gates minimize shrinkage but increase directional shrinkage (anisotropy)

• Wide, short gates reduce directional shrinkage

• Areas near gates or parallel to flow paths shrink more than distant or perpendicular sections

1.4 Injection Molding Process Parameters

Adjust these settings to reduce shrinkage:

• Mold temperature: Lower mold temperature speeds cooling, reducing shrinkage (critical for crystalline plastics)

• Holding pressure & time: Higher pressure + longer holding time = less shrinkage (but more directional shrinkage)

• Injection pressure: Increased pressure reduces viscosity and elastic recovery, lowering shrinkage

• Melt temperature: Avoid excessive melt temperature—higher temps increase shrinkage

1.5 Mold Design Tips for Shrinkage Control

For high-precision parts, follow this workflow:

1. Test mold with initial gating and process parameters

2. Measure part dimensions 24 hours after ejection (allow for post-molding shrinkage)

3. Adjust cavity dimensions based on actual shrinkage data

4. Fine-tune process parameters (e.g., mold temperature, holding time) for final optimization

Plastic Flowability: How to Ensure Proper Mold Filling

Flowability (or melt flow) describes how easily molten plastic flows through the mold’s runners, gates, and cavities. Poor flowability leads to incomplete filling, weld lines, and burn marks—while excessive flow can cause flash.

How to Measure Plastic Flowability

Key metrics to evaluate flowability:

• Melt Flow Index (MFI/MFR): Higher values = better flow

• Archimedean Spiral Flow Length: Longer flow = better flowability

• Flow Ratio (Flow Length ÷ Wall Thickness): Ideal ratio = 150–200 for most plastics

• Apparent Viscosity: Lower viscosity = better flow

Common Plastics Ranked by Flowability (Injection Molding)

Factors That Improve or Reduce Flowability

2.1 Temperature

• Temperature-sensitive plastics (PS, PP, PA, ABS, PC): Increase melt temperature to boost flow

• Temperature-insensitive plastics (PE, POM): Temperature changes have minimal effect—focus on pressure instead

2.2 Injection Pressure

• Higher pressure increases shear stress, improving flow (critical for low-flow plastics like PE and POM)

• Avoid over-pressurization, which causes flash and stress marks

2.3 Mold Design for Optimal Flow

• Use a streamlined gating system (short, wide runners)

• Ensure smooth cavity surfaces (reduce flow resistance)

• Add proper venting (prevents air traps that block flow)

• Design uniform cooling systems (avoids cold spots that thicken melt)

Plastic Crystallinity: What It Means for Molding

Crystallinity refers to the degree to which polymer molecules arrange into ordered, repeating structures as molten plastic cools. This property impacts shrinkage, transparency, and mechanical strength.

Crystalline vs. Amorphous Plastics: Key Differences

Practical Implications for Injection Molding

• Crystalline plastics (PE, PP, PA, POM):

  • Require more heat to melt (use machines with high plasticizing capacity)

  • Need controlled cooling (uniform mold temperature prevents uneven crystallization)

  • Higher shrinkage = adjust mold dimensions and holding pressure accordingly

• Plastiques amorphes (PMMA, PC, ABS) :

  • Rétrécissement plus faible = précision dimensionnelle plus facile à atteindre

  • Refroidissement plus rapide = temps de cycle plus courts

  • Plus enclins aux marques de stress = éviter le refroidissement rapide ou la surpression

Final Tips for Injection Molding Success

1. Vérifiez toujours la fiche technique du matériau pour connaître les taux de rétrécissement, les mesures de fluidité et les données de cristallinité.
2. Testez d'abord de petits lots pour optimiser les paramètres du processus (température du moule, pression, temps de refroidissement).
3. Pour les pièces complexes, utilisez un logiciel de simulation pour prévoir les problèmes de retrait et d'écoulement avant le moulage.
4. Adapter la conception du moule aux propriétés du plastique : par exemple, des portes plus larges pour les plastiques à faible débit, des parois uniformes pour les plastiques cristallins.

En maîtrisant ces trois propriétés fondamentales, vous réduirez les défauts, améliorerez la qualité des pièces en plastique et rationaliserez votre processus de moulage par injection.