
The client initially approached us with several questions about injection molding processes, and our professional responses gained their trust. Subsequently, they inquired if we could help them produce an injection-molded product, although the mold had already been manufactured elsewhere. Unfortunately, the quality of the products from the other supplier did not meet the client’s requirements. The primary issues were faint weld lines on the product surfaces, which were not very prominent but unacceptable for this appearance-critical product. Additionally, the product dimensions did not meet the client’s specifications.

This presented a challenge for us because a qualified injection-molded product consists of 40% product design, 40% mold production, and 30% production process and materials. With the mold already made, our room for maneuver was very limited. However, after analyzing the client’s mold drawings and samples, we decided to give it a try.

Upon receiving the mold, we immediately arranged for a trial run. Despite numerous adjustments to temperature, pressure, holding time, and injection speed, we could not resolve the issue of the weld lines. The problem worsened with potential scorching on the product surface when trying to eliminate the weld lines. After a meeting and analysis by the technical department, the only solution was to recommend modifying the mold to address the issues. We identified that one of the problems was the product’s thickness combined with insufficient and small-sized gates, which caused a significant temperature difference at the weld points during material flow, leading to weld lines.
Therefore, we proposed the following improvements:
- Modify the gate design to increase the number and size of gates, allowing the material to enter the mold more quickly and reduce temperature differences during welding.
- Add a hot runner system to the mold to maintain consistency in the material temperature inside the mold.
- Switch to a more fluid PC-ABS material instead of standard ABS.
- Use a mold temperature machine to heat the mold before production.
These modifications were approved by the client. After implementing these improvements, the product achieved the client’s desired outcomes with accurate dimensions and a smooth, flawless surface. This case underscores the critical role of mold design in injection molding processes. With over 30 years of experience in injection molding, our expertise spans product and mold design, production, and large-scale manufacturing. Feel free to contact us with any questions about injection molding products. Choosing Ideal-Pro means choosing peace of mind!
저자 소개

Alex Yu
아이디얼 프로 매뉴팩처링
알렉스는 Ideal Pro의 공동 창립자이지만, 주요 프로젝트를 총괄하거나 기술 팀을 이끌지 않을 때는 장거리 자전거 타기를 즐기거나, 동네에서 가장 맛있는 커피를 찾아다니거나, 다음 여행 계획을 세우는 모습을 볼 수 있습니다. 국제 무역 영업과 프로젝트 관리 분야에서 20년 이상의 경력을 쌓아온 그는 촉박한 마감 기한부터 까다로운 엔지니어링 문제까지, 그 사이의 모든 상황을 다 겪어보았습니다. 그는 훌륭한 성과는 충분한 휴식을 취한 마음과 맛있는 커피에서 나온다고 믿으며, 맡은 모든 프로젝트에 그와 같은 호기심과 세심한 주의를 기울입니다. 사무실에 있지 않을 때는 대개 야외 어딘가에서 새로운 장소를 탐험하며, 나중에 나눌 이야기를 수집하곤 합니다.




